Filter
Top Products
52
PROBLEMS CAUSE
POSSIBLE SOLUTIONS
The image
remains blurred.
•
When you see the stationary image for a long time, it may remain on the screen if
you change the image. It is not a breakdown. The blurred image will disappear in a
few minutes.
Red, blue or green
dots are viewed on
the text of image.
•
It is normal.
The image is
distorted on the
screen and
noise is heard.
No sound is
heard.
•
Volume is not turned up.
•
Mute function on PCGC is on.
•
Connection to other equipment is not
made correctly.
•
Turn up the volume.
• Cancel the mute function. See page 30.
• Check connections.
See page 21.
Nothing is
displayed on
the PC monitor.
•
The PC monitor is not turned on.
•
Turn on the monitor.
Warm air comes out
of the exhaust vents.
•
This is typical of the LCD projector.
Adjustments cannot
be made.
•
The operation is incorrectly made due
to noise or interference.
•
Reset the mode and try again.
•
The cable for connection with other
equipment is not plugged securely
into the terminal.
•
The projector is installed too close to
other equipment.
•
Plug the connecting cable securely into the
terminal. See pages 17-21.
•
Install the projector far away from other
equipment.