Filter
Top Products
40
DataTalker Owner’s Manual
3.3.7 VOICE/FAX CHANNEL 1 E&M Connector
Use the E&M connector to connect the DataTalker to the E&M connector on an analog PBX trunk
when linking two PBXs together. The E&M connector is an RJ-48 jack. This connector is
available on voice/fax channel 1 only.
3.3.8 DSU/TA DIGITAL Connector
Use the DSU/TA Digital connector to connect the DataTalker to a DDS or dedicated network line
when an internal DSU is installed, or to an ISDN line when the ISDN terminal adapter is installed.
The connector is an RJ-48 jack.
3.3.9 MODEM LEASED Connector
Use the LEASED connector to connect the DataTalker to a leased line when an internal
composite link modem is installed. The connector is an RJ-11 jack.
3.3.10 MODEM DIAL-UP Connector
Use the DIAL-UP connector to connect the DataTalker to the PSTN when an internal composite
link modem is installed. The connector is an RJ-11 jack.