Filter
Top Products
6 Callback Security
93
5. After the delay specified by the
#CBDn
command, the callback mo-
dem calls the extension that you entered after the + character. If the
callback modem is unable to establish a connection, it tries again,
up to the number of attempts specified by the
#CBAn
command.
6. After the modems reconnect, the following message reappears:
Password>
7. Type the same password that you used to initiate the call. You have
three attempts to enter the password or be disconnected.
8. If the password is valid, the following message appears and the
modems establish a working connection:
OK Connecting
Direct Connection
Use this procedure when you want to connect without first being called
back. The password that you use must be set up for an optional direct
connection.
1. Using a data communications program such as HyperTerminal, dial
the number of the callback modem..
2. When the connection is established, the callback modem responds
with the following message:
Password>
3. Type a direct connection password, press the - key, and press EN-
TER You have three attempts or one minute to enter a valid pass-
word.
4. If the password is valid, the following message appears and the
modems establish a working connection:
OK Connecting