Filter
Top Products
User Guide
98
Command: #S
x
Enter Setup Password
Values:
x
= password (1–8 characters, case sensitive)
Default: MTSMODEM
Description: Enters the password used for callback security
and remote configuration setup. This command
allows the use of all callback security commands.
Command: #S=
x
Store Setup Password
Values:
x
= password (1–8 characters, case sensitive)
Default: MTSMODEM
Description: Stores a new password for callback security and
remote configuration setup.
Command: &V Display Current Settings
Values: n/a
Description: Displays the modem’s active settings, including
the telephone numbers stored in nonvolatile
memory and the security settings, if enabled. If
the setup password has been entered, the pass-
words are also displayed.
Command: &Zy=[
+
][
-
]
x
[,???] Store Dialing Command
Values:
y
= 0–29 (callback security enabled)
x = Dialing command string
Default: None
Description: Stores dialing command
x
in memory location
y
.
The command string must begin with AT and can
have up to 35 characters. The telephone number
in the command must be preceded by D, DT, or
DP. Example: AT&Z0=+-ATM0D5551212,???.
During a call, if the + or - character is not entered
after the password, the modem will call back the
stored number. This command can be entered