Filter
Top Products
User Guide
120
European Low Voltage Directive
When correctly installed, the modem will present no hazard to the user.
When correctly installed, the modem will be connected to the PSTN or
a PW and to a Data Terminal Equipment (DTE), whose modem connec-
tions comply with ITU-T recommendation V.28. The DTE connections
are therefore taken to be safe voltages (less than ±30 volts).
Ports that are capable of connecting to other apparatus are defined as
SELV. To ensure conformity with EN60950, ensure that these ports are
only connected to ports of the same type on other apparatus.
The main power source shall be installed near to the equipment and
shall be easily accessible. The plug that connects the apparatus to the
mains power supply must be fitted with a 5A fuse that complies with
BS1362.
EMC and Safety Compliance
The CE mark is affixed to the enclosed MultiTech product to confirm
compliance with the following European Community Directives:
• Council Directive 89/336/EEC of 3 May 1989 on the approximation of
the laws of Member States relating to electromagnetic compatibility;
and
• Council Directive 73/23/EEC of 19 February 1973 on the harmoniza-
tion of the laws of Member States relating to electrical equipment
designed for use within certain voltage limits;
both amended by
Council Directive 93/68/EEC of 22 July 1993 on the harmonization of
CE marking requirements.