Filter
Top Products
4 AT Commands, S-Registers, and Result Codes
65
Command: %DC
n
AT Command Control
Values:
n
= 0 or 1
Default: 0
Description: %DC0 The modem responds to AT commands.
%DC1 The modem ignores AT commands.
Note: The modem will respond to AT%DC for 10 seconds after power-up.
Command: %E
n
Fallback and Fall Forward Control
Values:
n
= 0, 1, or 2
Default: 2
Description: %E0 Disable fallback and fall forward.
%E1 Enable fallback, disable fall forward.
%E2 Enable fallback and fall forward.
Command: $D
n
DTR Dialing
Values:
n
= 0 or 1
Default: 0
Description: $D0 Disables DTR dialing.
$D1 Dials the number in memory location 0 when
DTR goes high.
Command: $EB
n
Asynchronous Word Length
Values:
n
= 0 or 1
Default: 0
Description: $EB0 Enables 10-bit mode.
$EB1 Enables 11-bit mode.