Filter
Top Products
User Guide
96
Command: #CBP
n
Callback Parity
Values: n
= 0, 1, or 2
Default: 0
Description: Sets parity for the callback security messages.
The parity of the messages should match the
parity of the computer the modem is attached to.
This command can be entered after the setup
password has been entered and callback security
is enabled.
#CBP0 No parity.
#CBP1 Odd parity.
#CBP2 Even parity.
Command: #CBRy Callback Security Reset
Values:
y
= 00–29
Default: None
Description: Deletes the password and phone number from
the
yy
memory location. This command can be
entered after the setup password has been en-
tered and callback security is enabled.
Command: #CBS
n
Callback Enable/Disable
Values: n
= 0, 1, 2, or 3
Default: 0
Description: Enables or disables callback security options.
When callback security is enabled, phone num-
ber memory locations 0–4, used for quick dialing
and DTR dialing, become unavailable and are
replaced by callback security memory locations
0–29. The phone number memory locations and
their contents are restored when callback security
is disabled.