Filter
Top Products
E Upgrade Procedures
149
FLASHWIN
1. Copy FLASHWIN.ZIP and the downloaded .HEX file to a temporary
directory.
2. Unzip FLASHWIN.ZIP.
3. Run FLASHWIN by double-clicking on its icon or file name.
4. Select the COM port your modem is on and the speed at which you
want to program.
5. Enter the name and path of the *.HEX file you want to load into the
modem.
6. When you have verified your selections, click Perform Flash to load
the firmware into the modem.
7. When Loading Status reaches 100%, the modem has been up-
graded and you may close FLASHWIN.
FLASHNT
1. Copy FLASHNT.ZIP and the downloaded .HEX file to a temporary
directory.
2. Unzip FLASHNT.ZIP.
3. Run FLASHNT.EXE by double-clicking on its icon or file name.
4. Select the COM port your modem is on and the speed that you want
to program at. The default is 57,600 bps.
5. Verify that the selected firmware file (*.HEX) is the correct one. If
necessary, use the Browse button to find the correct file.
6. Click Finish to begin upgrading your modem.
7. When the flash upgrade is complete, the message
Flash Loader
has completed
appears.