Filter
Top Products
2 Quick Start
25
Modem Commands:
Select MultiTech. If you must dial
9
to get an
outside line, type ATDT9, in the Dial prefix box (include the comma).
3. Click File, then click Save, and save as multibbs.trm.
4. Click Phone, then click Dial to dial the BBS. You will know you
have reached a modem by the harsh sounds of the modem hand-
shake.
5. When the BBS welcome screen appears in the HyperTerminal win-
dow, type your first name, last name, and password following the
prompts. If you are a first-time caller, the BBS asks if your name is
spelled correctly. If you answer Y, a questionnaire appears. You
must complete the questionnaire to use the BBS on your first call.
6. Press ENTER until the main menu appears. From the main menu
you have access to two areas: the Files Menu and News. For help
with menu commands, type ?.
7. In the Main Menu, type F and press ENTER to access the Files
Menu, then type D and press ENTER to download.
8. At the prompt, if you have Microsoft Word 6.0 or later, type
register.doc and press ENTER twice. If you do not have Microsoft
Word, type register.txt and press ENTER twice.
9. Answer Y or N to the automatic logoff question.
10. Type X and press ENTER to select the Xmodem transfer protocol.
11. To begin the download in Terminal, click Transfers, then click Re-
ceive binary file. Next, select the destination directory, type the file
name (register.doc or register.txt), and click OK. If the download
fails, your baud rate may be set too high. Log off, set the COM port
baud rate lower, and call again.
12. To log off the BBS if you answered N in step 9, press ENTER, type
G for “good-bye,” then press ENTER twice again.