Filter
Top Products
Switching Commands
151
ProSafe M4100 and M7100 Managed Switches
particular group in that interface. This value must be less than the IGMP Query Interval time
value. The range is 1–25 seconds.
Default
Format set igmp maxresponse <1-25>
Mode
• Global Config
• Interface Config
Format set igmp maxresponse <vlan_id> <1-25>
Mode
no set igmp maxresponse
This command sets the max response time (on the interface or VLAN) to the default value.
Format no set igmp maxresponse
Mode
• Global Config
• Interface Config
Format no set igmp maxresponse <vlan_id>
Mode
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list
of interfaces with multicast routers attached. The range is 0–3600 seconds. A value of 0
indicates an infinite time-out, that is, no expiration.
Default
Format set igmp mcrtrexpiretime <0-3600>
Mode
• Global Config
• Interface Config
Format set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode
10 seconds
VLAN Config
VLAN Config
0
VLAN Config