Filter
Top Products
Quality of Service (QoS) Commands
463
ProSafe M4100 and M7100 Managed Switches
class
This command creates an instance of a class definition within the specified policy for defining
treatment of the traffic class through subsequent policy attribute statements. The
<classname> is the name of an existing DiffServ class.
Note: This command causes the specified policy to create a reference to
the class definition.
Note: The CLI mode is changed to Policy-Class-Map Config when this
command is successfully executed.
no class
This command deletes the instance of a particular class and its defined treatment from the
specified policy. <classname> is the names of an existing DiffServ class.
Note: This command removes the reference to the class definition for the
specified policy.
mark cos
This command marks all packets for the associated traffic stream with the specified Class of
Service value in the priority field of the 802.1p header (the only tag in a single tagged packet
or the first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not
already contain this header, one is inserted. The CoS value is an integer from 0 to 7.
Format class <classname>
Mode
Policy-Map Config
Format no class <classname>
Mode
Policy-Map Config
Default
1
Format mark-cos <0-7>