Filter
Top Products
Switching Commands
51
ProSafe M4100 and M7100 Managed Switches
vlan participation all
This command configures the degree of participation for all interfaces in a VLAN. The ID is a
valid VLAN identification number.
Format vlan participation all {exclude | include | auto} <1-4093>
Mode
You can use the following participation options:
include
exclude
auto
vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces.
Default
Format vlan port acceptframe all {vlanonly | all}
Mode
The modes defined as follows:
VLAN Only
mode
Admit All mode
With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q
VLAN Specification.
no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and
Global Config
Participation
Options
Definition
The interface is always a member of this VLAN. This is equivalent to registration fixed.
The interface is never a member of this VLAN. This is equivalent to registration
forbidden.
The interface is dynamically registered in this VLAN by GVRP. The interface will not
participate in this VLAN unless a join request is received on this interface.
This is
equivalent to registration normal.
all
Global Config
Mode Definition
Untagged frames or priority frames received on this interface are discarded.
Untagged frames or priority frames received on this interface are accepted and assigned
the value of the interface VLAN ID for this port.