Filter
Top Products
IPv6 Commands
406
ProSafe M4100 and M7100 Managed Switches
show ipv6 ospf interface stats
This command displays the statistics for a specific interface. The command only displays
information if OSPF is enabled.
Format show ipv6 ospf interface stats <slot/port>
Modes
• Privileged EXEC
• User EXEC
Term Definition
Interface
Valid slot and port number separated by forward slashes.
Admin Mode
States whether OSPF is enabled or disabled on a router interface.
Area ID
The OSPF Area ID for the specified interface.
Router Priority
The router priority. The router priority determines which router is the designated router.
Hello Interval
The frequency, in seconds, at which the interface sends Hello packets.
Dead Interval
The amount of time, in seconds, the interface waits before assuming a neighbor is down.
Retransmit
Interval
The frequency, in seconds, at which the interface sends LSA.
Retransmit
Delay Interval
The number of seconds the interface adds to the age of LSA packets before
transmission.
LSA Ack
Interval
The amount of time, in seconds, the interface waits before sending an LSA
acknowledgement after receiving an LSA.
Term Definition
OSPFv3 Area ID
The area id of this OSPF interface.
IPv6 Address
The IP address associated with this OSPF interface.
OSPFv3
Interface Events
The number of times the specified OSPF interface has changed its state, or an error has
occurred.
Virtual Events
The number of state changes or errors that occurred on this virtual link.
Neighbor
Events
The number of times this neighbor relationship has changed state, or an error has
occurred.
Packets
Received
The number of OSPFv3 packets received on the interface.
Packets
Transmitted
The number of OSPFv3 packets sent on the interface.
LSAs Sent
The total number of LSAs flooded on the interface.