NETGEAR M4100-D12G Switch User Manual


 
Switching Commands
189
ProSafe M4100 and M7100 Managed Switches
0/13 Down Disabled Disabled Disabled 0,1
0/14 Down Disabled Disabled Disabled 0,1
TLV Codes: 0- Capabilities, 1- Network Policy
2- Location, 3- Extended PSE
4- Extended Pd, 5- Inventory
--More-- or (q)uit
(Switch) #show lldp med interface 0/2
Interface Link configMED operMED ConfigNotify TLVsTx
--------- ------ --------- -------- ------------ -----------
0/2 Up Disabled Disabled Disabled 0,1
TLV Codes: 0- Capabilities, 1- Network Policy
2- Location, 3- Extended PSE
4- Extended Pd, 5- Inventory
(Routing) #
show lldp med local-device detail
This command displays detailed information about the LLDP data a specific interface
transmits.
Format show lldp med local-device detail <slot/port>
Mode
Media Application
Type
Vlan ID
Priority
DSCP
Unknown
Tagged
Hardware Rev
Firmware Rev
Software Rev
Serial Num
Mfg Name
Model Name
Example: The following shows example CLI display output for the command.
Privileged EXEC
Term Definition
Shows the application type. Types are unknown, voice, voicesignaling, guestvoice,
guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo,
videosignaling.
Shows the VLAN id associated with a particular policy type
Shows the priority associated with a particular policy type.
Shows the DSCP associated with a particular policy type.
Indicates if the policy type is unknown. In this case, the VLAN ID, Priority and DSCP
are ignored.
Indicates if the policy type is using tagged or untagged VLAN.
Shows the local hardware version.
Shows the local firmware version.
Shows the local software version.
Shows the local serial number.
Shows the manufacture name.
Shows the model name.