NETGEAR M4100-D12G Switch User Manual


 
Routing Commands
231
ProSafe M4100 and M7100 Managed Switches
ip route
This command configures a static route. The <ipaddr> parameter is a valid IP address,
and <subnetmask> is a valid subnet mask. The <nexthopip> parameter is a valid IP
address of the next hop router. Specifying Null0 as nexthop parameter adds a static reject
route. The optional <preference> parameter is an integer (value from 1 to 255) that allows
you to specify the preference value (sometimes called “administrative distance”) of an
individual static route. Among routes to the same destination, the route with the lowest
preference value is the route entered into the forwarding database. By specifying the
preference of a static route, you control whether a static route is more or less preferred than
routes from dynamic routing protocols. The preference also controls whether a static route is
more or less preferred than other static routes to the same destination. A route with a
preference of 255 cannot be used to forward traffic.
For the static routes to be visible, you must perform the following steps:
Enable ip routing globally
.
Enable ip routing for the interface.
Confirm that the associated link is also up.
Default
Format ip route <ipaddr> <subnetmask> [<nexthopip> | Null0] [<preference>]
Mode
no ip route
This command deletes a single next hop to a destination static route. If you use the
<nexthopip> parameter
, the next hop is deleted. If you use the <preference> value, the
preference value of the static route is reset to its default.
Format no ip route <ipaddr> <subnetmask> [{<nexthopip> [<preference>] |
Null0}]
Mode
Lease
The time (in seconds) that the IP address was leased by the server.
Renewal
The time (in seconds) when the next DHCP renew Request is sent by DHCPv4 Client
to renew the leased IP address.
Rebind
The time (in seconds) when the DHCP Rebind process starts.
Retry count
Number of times the DHCPv4 client sends a DHCP REQUEST message before the
server responds.
preference—1
Global Config
Global Config
Term Definition