NETGEAR M4100-D12G Switch User Manual


 
Utility Commands
591
ProSafe M4100 and M7100 Managed Switches
debug ip pimdm packet
Use this command to trace PIMDM packet reception and transmission. receive traces only
received PIMDM packets and transmit traces only transmitted PIMDM packets. When
neither keyword is used in the command, then all PIMDM packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length,
and the interface on which the packet is received or transmitted is displayed on the console.
Default
Format debug ip pimdm packet [receive|transmit]
Mode
no debug ip pimdm packet
Use this command to disable debug tracing of PIMDM packet reception and transmission.
debug ip pimsm packet
Use this command to trace PIMSM packet reception and transmission. receive traces only
received PIMSM packets and transmit traces only transmitted PIMSM packets. When
neither keyword is used in the command, then all PIMSM packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length,
and the interface on which the packet is received or transmitted is displayed on the console.
Default
Format debug ip pimsm packet [receive|transmit]
Mode
no debug ip pimsm packet
Use this command to disable debug tracing of PIMSM packet reception and transmission.
Format no debug ip pimsm packet [receive|transmit]
Mode
debug ip vrrp
Use this command to enable VRRP debug protocol messages.
Default
Format debug ip vrrp
Mode
disabled
Privileged EXEC
Format no debug ip pimdm packet [receive|transmit]
Mode
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC
disabled
Privileged EXEC