NETGEAR M4100-D12G Switch User Manual


 
Routing Commands
241
ProSafe M4100 and M7100 Managed Switches
ECMP Group 1 with 2 next hops (used by 1 route)
172.20.33.100 on interface 2/33
172.20.34.100 on interface 2/34
ECMP Group 2 with 3 next hops (used by 1 route)
172.20.32.100 on interface 2/32
172.20.33.100 on interface 2/33
172.20.34.100 on interface 2/34
ECMP Group 3 with 4 next hops (used by 1 route)
172.20.31.100 on interface 2/31
172.20.32.100 on interface 2/32
172.20.33.100 on interface 2/33
172.20.34.100 on interface 2/34
show ip route summary
Use this command to display the routing table summary. Use the optional all parameter to
show the number of all routes, including best and non-best routes. To include only the
number of best routes, do not use the optional parameter.
When the optional keyword all is given, some statistics, such as the number of routes from
each source, include counts for alternate routes.
An alternate route is a route that is not the
most preferred route to its destination and therefore is not installed in the forwarding table.
When this keyword is not given, the output reports only for the best routes.
Format show ip route summary [all]
Modes
• Privileged EXEC
• User EXEC
Term Definition
Connected
Routes
The total number of connected routes in the routing table.
Static Routes
Total number of static routes in the routing table.
RIP Routes
Total number of routes installed by RIP protocol.
OSPF Routes
Total number of routes installed by OSPF protocol.
Reject Routes
Total number of reject routes installed by all protocols.
Total Routes
Total number of routes in the routing table.
Best Routes
The number of best routes currently in the routing table. This number counts only the
best route to each destination.
Alternate
Routes
The number of alternate routes currently in the routing table. An alternate route is one
that was not selected as the best route to its destination.
Route Adds
The number of routes added to the routing table.
Route Modifies
The number of routes that changed after they were initially added to the routing table.