Filter
Top Products
11-10 Administration Guide
Once the public ranges have been assigned, the next step is to bind interior addresses to them. Because these
bindings occur in ordered lists, called map lists, you must first define the list, then add mappings to it.
From the Network Address Translation screen select Add Map List and press Return.
The Add NAT Map List screen appears.
■ Select Map List Name and enter a descriptive name for this map list. A new menu item, Add Map,
appears.
■ Select Add Map and press Return. The Add NAT Map screen appears.
■ Select First and Last Private Address and enter the first and last interior IP addresses you want to assign
Add NAT Map List
Map List Name: my_map
Add Map...
Add NAT Map ("my_map")
First Private Address: 192.168.1.1
Last Private Address: 192.168.1.254
Use NAT Public Range...
ADD NAT MAP CANCEL