Filter
Top Products
11-24 Administration Guide
■ Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.
■ Select the map list you want to bind to this Connection Profile and press Return. The map list you selected
will now be bound to this Connection Profile.
■ Select NAT Server List and press Return. A pop-up menu displays a list of your defined server lists.
■ Select the server list you want to bind to this Connection Profile and press Return. The server list you
selected will now be bound to this Connection Profile.
Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask
fields’ visibility are dependent only on the IP Addressing type.
IP Profile Parameters
+--NAT Map List Name---+
+----------------------+
Address Trans| Easy-PAT |s
IP Addressing| my_map |mbered
| <<None>> |
NAT Map List.| |sy PAT
NAT Server Li| |
| |
Local WAN IP | |
| |
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
| |
Filter Set...| |tBIOS Filter
Remove Filter| |
| |
Receive RIP: | |th
| |
+----------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
IP Profile Parameters
+-NAT Server List Name-+
+----------------------+
Address Trans| Easy-Servers |s
IP Addressing| my_servers |mbered
| <<None>> |
NAT Map List.| |sy PAT
NAT Server Li| |
| |
Local WAN IP | |0.0.0
Local WAN IP | |0.0.0
Remote IP Add| |7.0.0.2
Remote IP Mas| |5.255.255.255
| |
Filter Set...| |tBIOS Filter
Remove Filter| |
| |
Receive RIP: | |th
| |
+----------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.