Filter
Top Products
Easy Setup 7-3
Quick Easy Setup Connection Path
This section may be all you need to do to configure your Netopia 4753 G.SHDSL Integrated Access Device to
connect to the Internet.
Your service provider must supply you with several parameter values for you to enter in the device. The service
provider will provide values for the parameters shown below:
Parameter: Default value: Your value:
DSL Line Configuration Screen
Regional Setting Annex A (default) or Annex B
Data Link Encapsulation PPP or RFC1483 (default)
PPP Mode VC Multiplexed (default) or
LLC SNAP
RFC1483 Mode Bridged 1483 (default)
or Routed 1483
PPP over Ethernet (PPPoE)
(for Bridged 1483 only)
Off (default) or On
Data Circuit VPI
Data Circuit VPI
(for ATM WAN DSL Mode only)
0-255 (8 is default)
0-65535 (35 is default)
Voice Easy Setup Screen
Voice Gateway CopperCom,
JetStream,
TollBridge,
TDSoft
or Zhone
Voice VPI
Voice VCI
(for any Voice Gateway other
than TollBridge)
0-255 (0 is default)
0-65535 (0 is default)
Easy Setup Profile Screen
Address Translation Enabled Yes (default) or No
IP Addressing Unnumbered or Numbered
(default)
Local WAN IP Address
Local WAN IP Mask
n/a
Remote IP Address
Remote IP Mask
n/a
PPP Authentication None (default), PAP or CHAP
User Name (or Host Name) n/a