Netopia 4753 Barcode Reader User Manual


 
WAN and System Configuration 9-15
The ATMP/PPTP Default Profile
The ATMP/PPTP Default Profile screen controls whether or not your device will answer VPN connection attempts
without an explicitly configured connection profile. See “Virtual Private Networks (VPNs)” on page 12-1 for more
information.
System Configuration Screens
You can connect to the Netopia 4753’s system configuration screens in either of two ways:
By using Telnet with the device’s Ethernet port IP address
Through the console port, using a local terminal (see “Connecting a Console Cable to Your Device” on
page 6-3)
You can also retrieve the Netopia 4753’s configuration information and remotely set its parameters using the
Simple Network Management Protocol (see “SNMP” on page 14-13).
Open a Telnet connection to the device’s IP address; for example, “192.168.1.1.”
The console screen will open to the Main Menu, similar to the screen shown below:
Navigating through the System Configuration screens
To help you find your way to particular screens, some sections in this guide begin with a graphical path guide
similar to the following example:
Netopia 4753 v5.1
Easy Setup...
WAN Configuration...
System Configuration...
Voice Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.