Filter
Top Products
Monitoring Tools 14-3
Current status
The current status section is a table showing the current status of the WAN. For example:
Profile Name: Lists the name of the connection profile being used, if any.
Rate: Shows the line rate for this connection.
%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the
connection.
Remote Address: Shows the IP address of the connected remote router if the connection is using IP.
Est: Indicates whether the connection was locally (“Lcl”) or remotely (“Rmt”) established.
More Info: Indicates, in order of priority, the NAT address in use for this connection or the caller identification (if
available).
Status lights
This section shows the current real-time status of the Netopia 4753’s status lights (LEDs). It is useful for
remotely monitoring the router’s status. The Quick View screen’s arrangement of LEDs corresponds to the
physical arrangement of LEDs on the router. The active voice ports are also indicated.
Each LED representation can report one of four states:
–: The LED is off.
R: The LED is red.
G: The LED is green.
Y: The LED is yellow.
The section “Netopia 4753 Status Lights” on page 3-5 describes the meanings of the colors for each LED.
Current DSL Status
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
ISP 1536 10 IP 92.163.4.1 Lcl NAT 192.163.100.6
LED Status
-PWR----ERROR----ETHERNET----DSL---------VOICE----------+--------LEDS---------
1 2 3 4 5 6 7 8 | '-'= Off 'G'= Green
G - - - - - G G G | 'R'= Red 'Y'= Yellow