Nortel Networks 2 Surge Protector User Manual


 
Setting up Enterprise Edge Personal Call Manager 21
P0911958 Issue 01 Enterprise Edge 2.0 Personal Call Manager User Guide
I am dialing from
Use the I am dialing from list box to save different sets of dialing properties. You
can use I am dialing from when you have a computer (such as a laptop) that you use
at different locations. You can save the settings for the different locations under
different names in the I am dialing from list box. You can then quickly change to
the new settings when you switch locations.
For example, you can have a laptop computer that you use at both the north and
south locations. If the north and south locations have different dialing requirements
(such as call waiting in the north but not in the south), you can set up two different
sets of dialing properties in the I am dialing from list box. Then, when you switch
locations, you can change the dialing properties by changing the name that appears
in the I am dialing from list box.
Creating a new location
When you create a new location, you are creating the name that is used to access the
new set of dialing properties. After you create the location, any changes made to
Dialing Properties dialog box are saved with this name.
To create a new location:
1. Click the New button.
A dialog box appears confirming that a new location was created.
2. Select the text in the I am dialing from list box.
3. Type the name of the new location.
4. Change the other parameters on the Dialing Properties dialog box to match
the dialing properties required for this location.
These fields are described later in this section.
5. Click the Apply button to store the changes with the new location.
Selecting a location
When you select a location, all of the dialing properties are changed to the settings
that are stored for that location.
To select a location:
1. Click the button in the I am dialing from list box.
A list of locations appears.
2. Click the location you are currently at.
The dialing properties are changed to the setting stored for this location.