Filter
Top Products
108 Configuring the domain
Otherwise, the client PC will not be able to
reach the portal for user authentication.
redir on|off
Specifies whether HTTP requests will be
redirected to the HTTPS server.
•
on—HTTP redirect is enabled
•
off—HTTP redirect is disabled
The default is off.
Browser-Based Management Configuration
The HTTP menu is used for enabling/disabling browser-based
configuration of your VPN Gateway. To access the Browser-Based
Interface (BBI), enter the Management IP address assigned to SNAS
cluster in your web browser.
The HTTP menu includes the following options:
Table 10
Browser-Based Management Configuration
cfg/sys/adm/http/
followed by
port
Sets the port number to be used for
browser-based SNAS configuration using
the BBI.
ena
Enables the HTTP server used for
browser-based configuration on the SNAS.
dis
Disables the HTTP server used for
browser-based configuration on the SNAS.
Browser-Based Management Configuration with SSL
The HTTPS menu is used for enabling/disabling browser-based
configuration of your VPN Gateway through a secure SSL tunnel. To
access the Browser-Based Management Interface (BBI), enter the
Management IP address assigned to your SNAS cluster in your web
browser.
The HTTPS menu includes the following options
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.