Filter
Top Products
356 Maintaining and managing the system
/maint
followed by:
radius
nap
Enter the desired tag or a comma-separated list of
tags (for example, enter aaa or aaa,dns). To trace
all features, press Enter to accept the default.
•
domain ID—specifies the Nortel SNAS domain to
which you want to limit tracing. The default is all.
To trace all domains, enter 0 or press Enter.
ATTENTION
With Nortel Secure Network Access Switch
Software Release 1.6.1, there is only one domain
in the system.
•
output mode—options are:
interactive—the information will be logged
directly in the CLI when a client authenticates to the
portal
tftp|ftp|sftp—the information will be logged
to a file exchange server. You are prompted to
provide the server information.
For sample output from the starttrace command,
see “Trace tools” (page 409).
stoptrace
Stops tracing. If you selected interactive mode for the
starttrace command and information is logged to
the CLI, press Enter to redisplay the CLI prompt.
Backing up or restoring the configuration
To save the system configuration to a file on a file exchange server, use
the following command:
/cfg/ptcfg <protocol> <host name or IP address of server>
<filename on server>
ATTENTION
The actual file name in server will be in "NSNAS-<NSNA Version No>-<filename
specified in ptcfg comamnd>" format.
To restore the system configuration, use the following command:
/cfg/gtcfg <protocol> <host name or IP address of server>
<filename on server>
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.