Filter
Top Products
274 Configuring system settings
/cfg/sys/accesslist
followed by:
list
the network address and network mask for all
entries in the Access List, by index number.
del <index number> Removes the specified entry from the list.
•
index number is the identification number
automatically assigned to the entry when
you added the entry to the list.
To view the index numbers of all configured
Access List entries, use the list command.
add <IPaddr> <mask> Adds an entry to the Access List. Only those
machines listed will be allowed to access the
Nortel SNAS through Telnet or SSH.
•
IPaddr is the IP address of the host to be
allowed access.
•
mask is the subnet mask. You can set
the mask to specify a single machine or a
range of machines on a specific network.
An index number is automatically assigned to
the entry.
Configuring date and time settings
To configure date and time settings for the cluster, use the following
command:
/cfg/sys/time
The Date and Time menu appears.
The Date and Time menu includes the following options:
/cfg/sys/time
followed by:
date <date>
Sets the system date.
• date is the date in YYYY-MM-DD format.
time <time>
Sets the system time.
• time is the time in HH:MM:SS format,
using a 24-hour clock.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.