Filter
Top Products
Viewing system information and performance statistics 341
/info
followed by:
domain [ <domain ID>
]
information about the domain configuration, such
as the portal Virtual IP address (pVIP), Nortel
Health Agent settings, authentication schemes,
groups, client filters, SSL settings, portal display,
network access devices, and SSH key. To restrict
the display to a specific domain, enter the domain
ID as part of the command.
ATTENTION
With Nortel Secure Network Access Switch
Software Release 1.6.1, there is only one domain
in the system.
switches [<switch IP
protocol/version>]
[<status>] [<name
type>] [<controlled
by>] [<active
clients>]
view the switch status information.
dist [ <hostid> ]
information about the network access devices and
pVIP distribution, by domain.
ip <IPaddr>|[option] Searches the session table based on the specified
IP address and information about the client
session. You are prompted to provide the domain
ID and the IP address. The information includes:
the domain ID; the switch ID and port (in slot/port
format); the client’s user name (MAC address for
an IP Phone); the client’s current IP address; the
source MAC address; the date the client logged
on (time is reported if logon was today); the client
device type; the client’s current VLAN membership;
and the Nortel SNAS host IP address (RIP). The
options for device type are phone or dynamic PC
(dn_pc).
The information is the same as that displayed by
the /info/mac command.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.