Filter
Top Products
Configuring the domain 117
Table 16
Configuring local DHCP services (cont’d.)
/cfg/doamin #/dhcp
followed by:
vendopts
<number> <name>
<value> <del>
Initiates a series of prompts that allow you to specify RFC 2132 vendor
options.
•
number is a unique number between 1 and 254 that you provide that
the system uses to identify the vendor options. The prompt is—Enter
vendor options number (1-254):
•
name refers to a name you provide for this set of vendor options. The
prompt is—Set the vendor option name:
•
type can be ip, ip_list, u8, u16, u32, string,orbool.
• value refers to allowed values for the type, as per RFC2132.
• del deletes the vendor options.
The values set at this level of the DHCP menus are applied globally to all
DHCP subnets and types. You are provided with the option of changing
the global values when specific DHCP settings are configured. See “DHCP
Settings menu” (page 117).
quick
Provides a quick DHCP setup wizard. Options are described under the
DHCP type: “Standard DHCP subnet type” (page 121), “Filter DHCP subnet
type” (page 120),or“Hub DHCP subnet type” (page 118).
DHCP Settings menu
The DHCP settings menu whenever you select an option that requires a
range of IP addresses. This occurs when configuring:
•
the settings for the standard DHCP subnet type
•
the known and unknown ranges for the filter DHCP subnet type
•
the red, yellow, and green ranges for the hub DHCP subnet type.
The DHCP settings menu includes the following options:
Table 17
DHCP Settings menu
ranges <list>
<del> <add>
<insert> <move>
Establishes the lower and upper IP addresses of a range of IP addresses.
More than one range can be configured.
• list a list of current ranges. The format of the output is #: IP
address : IP address where # is an integer that specifies the index
of the range. The index is required to delete, insert, or move a range.
• del # deletes the range with index number #.
• add IPaddressLower IPaddressUpper adds a new range with lower
and upper limits defined by IPaddressLower and IPaddressUpper,
respectively.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.