Filter
Top Products
Configuring the domain 115
Table 15
Configuring Nortel SNAS-specific attributes
/cfg/domain #/aaa/radacct/domainattr
followed by:
vendorid
Corresponds to the vendor-specific attribute
used by the RADIUS accounting server to
identify accounting information from the Nortel
SNAS domain.
The default Vendor-Id is 1872 (Alteon).
vendortype
Corresponds to the Vendor-Type value used
in combination with the Vendor-Id to identify
accounting information from the Nortel SNAS
domain.
The default Vendor-Type value is 3.
Configuring local DHCP services
The Nortel SNAS can be configured for DHCP services, to provide:
• support for non-NSNA network access devices including Nortel
Ethernet Switch Models 325 / 425 / 450 / 470 and 2500 series and
Ethernet Routing Switch models - 4500 series, 5500 series, 8300 and
8600 as well as third party switches, and support for multiple devices
on a port (for example, when a hub is connected to the port).
DHCP subnet type:
hub.
•
DNS server redirect from Nortel SNAS to the corporate DNS server, to
optimize Nortel SNAS performance when Filters only enforcement is
used. For more information on Filters only enforcement, see “Nortel
SNAS enforcement types” (page 28).
DHCP subnet type: filter
• a standard DHCP server that supports RFC 2131 in the context of the
Nortel SNAS network architecture; that is, server to server unicast
messages for DHCP relayed messages. For information on the Nortel
SNAS network architecture, see Nortel Secure Network Access
Solution Guide, NN47230-200, (formerly 320817).
DHCP subnet type: standard
To configure DHCP services, use the following command:
/cfg/doamin #/dhcp
The DHCP menu appears.
The DHCP menu includes the following options:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.