Filter
Top Products
416 CLI reference
Table 64
Global commands (cont’d.)
Command
Action
lines <n>
Set the number of lines (n) that display on the screen at one time.
TIP: The default value is 24 lines. When used without a value, the
current setting.
verbose <n> Sets the level of information displayed on the screen:
0 = Quiet: Nothing appears except errors—not even prompts.
1 = Normal: Prompts and requested output are shown without
menus.
2 = Verbose: Everything is shown.
TIP: The default level is 2. When used without a value, the current
setting .
Command line history and editing
You can use the CLI to retrieve and modify commands entered previously.
Table 65 "Command line history and editing options" (page 416) lists
options that are available globally at the command line.
Table 65
Command line history and editing options
Option
Description
history
Display a numbered list of the 10 most recent commands.
!!
Repeat the most recent command.
! <n>
Repeat the n
th
command shown on the history list.
popd
Return to a position in the menu structure that was bookmarked
using the pushd command.
Ctrl+p
Recall previous command from the history list. TIP: You can also
use the up arrow key. You can use this command to regress
through the last 10 commands. The recalled command can be
executed as is, or edited using the options in this table.
Ctrl+n
Recall next command from the history list. TIP: You can also use
the down arrow key. Use this command to proceed through the next
10 commands. The recalled command can be executed as is, or
edited using the options in this table.
Ctrl+a
Move cursor to the beginning of the command line.
Ctrl+e
Move cursor to the end of the command line.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.