Filter
Top Products
68 Managing the network access devices
/cfg/domain #[/switch #]/vlan
followed by:
del <index>
Removes the specified VLAN entry from the
applicable VLAN map.
•
index is an integer indicating the index
number automatically assigned to the
VLAN mapping when you created it
The index numbers of the remaining entries
adjust accordingly.
To view the index numbers for all VLAN
entries in the map, use the /cfg/domain
#[/switch #]/vlan/list command.
list
The index number, name, and VLAN ID for
all VLAN entries in the map.
Managing SSH keys
The Nortel SNAS and the network access devices controlled by the
Nortel SNAS domain exchange public keys so that they can authenticate
themselves to each other in future SSH communications.
To enable secure communication between the Nortel SNAS and the
network access devices, do the following:
Step Action
1 Generate an SSH public key for the Nortel SNAS domain (see
“Generating SSH keys for the domain” (page 70)), if necessary.
Apply the change immediately.
If you created the domain manually, the SSH key was generated
automatically (see “Manually creating a domain” (page 83)).
ATTENTION
The SSH key for the Nortel SNAS domain is not the same as the
SSH key generated during initial setup for all Nortel SNAS hosts in
the cluster (see “Initial setup” (page 41), step 15).
2 Export the Nortel SNAS public key to each network access
devices.
• For an Ethernet Routing Switch 8300:
Use the /cfg/domain #/switch #/sshkey/export
command to export the key directly to the switch (see
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.