Filter
Top Products
498 Configuring DHCP to auto-configure IP Phones
Figure 36
The Scope Options dialog box
3 Using the scroll bar, scroll down the list to find the two DHCP
options just created.
4 Configure Call Server Information:
a Select the check box beside 128 Call Server Information.
b In the String value field, enter the following string:
Nortel-i2004-A,iii.iii.iii.iii:ppppp,aaa,rrr;iii.iii.iii.iii:ppppp,aaa,rrr.
ATTENTION
The Nortel IP Phone 2002, IP Phone 2004, and IP Phone 2007
use the same signature. Therefore, the string value for Call
Server Information is the same for all these IP Phones.
Table 94 "Call Server Information string parameter values"
(page 498) describes the parameters.
Table 94
Call Server Information string parameter values
Parameter Description
A The hardware revision of the IP
Phone
iii.iii.iii.iii The IP Address of the Call Server (S1
or S2)
ppppp
The port number for the Call Server
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.