Filter
Top Products
Mediant 2000 SIP
Mediant 2000 SIP User’s Manual 66 Document #: LTRT-72504
5.9.3 Configuring the Trunk Settings
To configure the Trunk Settings, take these 9 steps:
1. Open the ‘Trunk Settings’ screen (Advanced Configuration menu > Trunk Settings); the
‘Trunk Settings’ screen is displayed.
Initially, the screen appears with the parameters fields grayed (indicating read-only). The
Stop Trunk button appears at the bottom of the screen.
The Trunk Status indicators appear colored. Table
5-7 shows the possible indicators and
their descriptions.
Figure
5-17: E1/T1 Trunk Settings Screen
2. To configure the parameters of a specific trunk, from the trunks displayed on the top, select
the trunk you want to configure by clicking the Trunk’s Status indicator. The first parameter
named ‘Trunk ID’ changes according to the trunk you click. The parameters displayed are for
the selected trunk only.