Nortel Networks 2000 Switch User Manual


 
Mediant 2000 SIP User’s Manual 5. Web Management
Version 4.4 85 July 2005
5.13 Resetting the Mediant 2000
The Reset screen enables you to remotely reset the gateway. Before reset you can choose to
save the gateway configuration to flash memory.
To reset the Mediant 2000, take these 3 steps:
1. Click the Reset button on the main menu bar; the Reset screen is displayed.
Figure
5-38: Reset Screen
2. Select one of the following options:
Burn - (default) the current configuration is burned to flash prior to reset.
Don’t Burn - resets the device without burning the current configuration to flash
(discards all modifications to the configuration).
3. Click the Reset button. If the Burn option is selected, all configuration changes are saved to
flash memory. If the Don’t Burn option is selected, all configuration changes are discarded.
The device is shut down and re-activated. A message about the waiting period is displayed.
The screen is refreshed.
Note: When Gatekeeper is used, the gateway issues an Unregister request before it
is reset (either from the Embedded Web Server, SNMP or BootP).