Filter
Top Products
Page 136 of 332 Chapter 10 — Connecting the Chassis Expander to the Main Chassis
553-3021-209 Standard 3.00 April 2000
5 Tighten the screws on the connectors.
Note:
The expansion cable kit (NTDK89) contains two NTDK95
cables.
Figure 36 shows the Main Chassis and Chassis Expander connected
with the two NTDK95 cables.
Figure 36
The Main and Expander chassis connected with the two NTDK95
CE-MUX/DS-30X bus cables
6 Install the system ground as described in “Chapter 11 – Installing
the system ground” on page 139.
7 Add circuit cards as described in “Chapter 12 — Installing the
circuit cards” on page 147.
CE-MUX
connection
DS-30X
connection