Filter
Top Products
Page 68 of 332 Chapter 3 — System and site requirements
553-3021-209 Standard 3.00 April 2000
Meridian Administration Tools
The Option 11C Mini supports the Meridian Administration Tools (MAT)
application. For information about MAT requirements and installing MAT
for the Option 11C Mini, refer to the
MAT User Guides
.
Cross-connect terminal requirements
Allow for future expansion and equipment changes at the cross-connect
terminal.
The cross-connect terminal must have enough space for connecting blocks to
terminate the following wires:
• five 25-pair cables from each Main Chassis
• four 25-pair cables from the Chassis Expander
• four conductors for the AUX cable from the Main Chassis
• one 25-pair cable from each QUA6 PFTU
• wiring from telephone sets and trunks
The BIX cross-connect system
is recommended for use with the Option 11C
Mini system. However, use of this system is not mandatory. You can use
some other cross-connect systems (for example, the Krone Test Jack Frame
for the UK and the Reichle Masari cross-connect terminal for Germany).
Only allow authorized personnel to access the Krone Test Jack Frame. Install
the Krone Test Jack Frame in a locked room or in an environment that
prevents free access to the equipment. The Krone Test Jack Frame must meet
this safety requirement to receive approval.
You can find information about the BIX cross-connect system in the
following documents:
•
BIX In-Building Cross-Connect System Material Description
(631-4511-100)
•
BIX In-Building Cross-Connect System Material Installation and
Servicing
(631-4511-200)
Refer to “Chapter 13 — Installing and connecting the cross-connect terminal”
on page 169 for additional information about the BIX, Krone Test Jack
Frame, and Reichle Masari cross-connect terminals.