Filter
Top Products
Chapter 16 — Starting the Option 11C Mini and installing software Page 219 of 332
Option 11C Mini Planning and Installation Guide
7 Select the Feature Set to be enabled.
Note:
The Feature Set selected must match the one provided with
keycodes. The Feature Set names shown below are examples only.
Select Feature Set You Wish to Enable:
1. General Services (NTSKxxxx)
2. Enhanced Services (NTSKxxxx)
3. Call Center Services (NTSKxxxx)
4. Enhanced Call Center Services (NTSKxxxx)
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> redisplay
(example only:)
Enter Selection: 2 <cr> (Enhanced Services)
8 Indicate if you want to add packages.
Feature Set Selection: Enhanced Services
Do you wish to add packages?
Select no, yes, or abort:
n <cr> (no)
y <cr> (yes)
a <cr> (abort)
Note:
Abort returns you to the main menu.
If the response was NO go to Step 11 on page 220.
If the response was YES go to Step 9.
9 Select the Feature packages that you want to add.
Summary of Packages selected is:
0-2 4-5 7-14 16-25 28-29 32-64 67 70-77 79-83 86-93 95 98-104 107-111
113-116 118-120 122-125 127-129 131-133 135 137-141 167
Enter packages (s) to be added, blank line to end:
215-235 <cr>
Note:
A Carriage Return, <CR>, ends selection entry or if no
packages are to be added.