Filter
Top Products
28 Setting up and maintaining Fax-on-demand mailboxes
FAX Set Up and Operation Guide P0886629 Issue 1.0
Before you can use the Fax-on-demand Mailbox you must initialize it. For
information about initializing a mailbox, refer to the Norstar Voice Mail Set Up and
Operation Guide.
Changing the parameters of a Fax-on-demand Mailbox
You can change any Fax-on-demand Mailbox parameter, except the mailbox
number. If you want to change a mailbox number, you must first delete the mailbox
and then add the new Fax-on-demand Mailbox. Refer to "
Deleting a Fax-on-
demand Mailbox" on page 40 and "Adding a Fax-on-demand Mailbox" on page 26.
Changing the parameters of a Fax-on-demand Mailbox involves:
• locating the display with the parameter you want to change
• pressing CHNG
• entering the new parameter value
The Fax-on-demand Mailbox parameters appear in the same order as they appear
when you add a Fax-on-demand Mailbox.
18. Enter the retry interval time and press OK
.
The default retry interval time is 10 minutes. This is
a two-digit field. The retry interval time is a value
between 01 and 60 minutes.
19. Press OK
.
Repeat steps 5 through 19 for each new Fax-on-
demand Mailbox you want to add.
20. Press to end this programming session.
Interval:
RETRY
Interval:15
CHNG