Filter
Top Products
Setting up and maintaining Fax-on-demand mailboxes 29
P0886629 Issue 1.0 FAX Set Up and Operation Guide
To change a Fax-on-demand Mailbox parameter:
Choosing a Fax-on-demand call method
For each Fax-on-demand Mailbox you must choose whether the call method is one-
call or two-call. When you choose the one-call method:
• the Fax message is transmitted during the original call
• the caller must use a fax machine to retrieve a Fax message
• the caller pays for any charges incurred
When you choose the two-call method:
• the Dialing Translation Table must be created and the Dialing Translation
Parameters must be set
• the caller provides a fax telephone number of where the information is to be
delivered
• the Fax message is transmitted in the second call which is originated by Norstar
Voice Mail
Note: For information on creating the Dialing Translation Table and setting all the
Dialing Translation Parameters, refer to "
Appendix B: Dialing Translation"
on page 57.
Each Fax-on-demand Mailbox is assigned a number of Fax messages a caller can
request. The maximum number of Fax messages that can be requested is eight.
1. Press
.
2. Enter the System Coordinator Mailbox number and
password and press OK
.
3. Press MBOX
.
4. Press CHNG
.
5. Enter the Fax-on-demand Mailbox number.
6. To select a parameter, press NEXT
until the display
shows the parameter you want to change. To change
the parameter, press CHNG
and enter the new
parameter value.
7. Press to end this programming session.
Log:
QUIT RETRY
Admin
AA OTHR
Mailbox Admin
ADD DEL
Mbox:
DIR QUIT
Password
RESET