Filter
Top Products
68 Appendix B: Dialing Translation
FAX Set Up and Operation Guide P0886629 Issue 1.0
An example of a Dialing Translation Table created using a basic text editor.
Technician Created Dialing Translation Table
Installing the Dialing Translation Table onto the Norstar Voice Mail Sys-
tem
There are four distinct steps for installing the Dialing Translation Table file onto the
Norstar Voice Mail system.
• Create a DOS system disk.
• Create an Autoexec.bat file.
• Load the Dialing Translation Table file (dial.20) and the Autoexec.bat file onto
the DOS system disk.
• Load the Dialing Translation Table file onto the Norstar Voice Mail system.
Creating a DOS system disk
A DOS system disk is a floppy disk that has system files copied onto it. This type
of disk is required to automatically load the dialing translation table file onto the
Norstar Voice Mail system.
To create a DOS system disk:
1. Insert a blank 3.5" disk into the floppy disk drive of a DOS compatible
computer.
2. Ensure the DOS prompt is on the computer screen.
3. Type Format a: /s and follow the instructions shown on the screen.
Note: The default name for the floppy disk drive is a:. However, on
computers with two disk drives, the 3.5" drive may be named b:. If the
drive is named b:, replace a: with b: in the above command. If you are
unsure of the name of the 3.5" floppy disk drive, check the user
manuals for your computer.
INPUT OUTPUT Explanation
011 011 First entry in the Dialing Translation Table.
416 - The Input value is 416 and the Output value is null.
905206 905206 These specific 905 telephone exchanges appear before the more
generic 905 entry.
90527 90527
905 1905 The generic 905 sub-string must appear after the longer more
specific 905 strings.
9011 # 9011 is a restricted DN.
- 1 The Input value is null and the Output value is 1.