Filter
Top Products
Setting up and maintaining Fax-on-demand mailboxes 39
P0886629 Issue 1.0 FAX Set Up and Operation Guide
For more information about designing, building, changing, saving or enabling a
CCR Tree, refer to the Norstar Voice Mail Set Up and Operation Guide.
Changing a Fax Point
From CCR, you can change the Fax-on-demand Mailbox number and destination
of a Fax Point. To change the greeting, call method or Fax messages available, you
must open the Fax-on-demand Mailbox via
. For information
about changing the parameters of Fax-on-demand Mailboxes, refer to "
Changing
the parameters of a Fax-on-demand Mailbox" on page 28.
To change a Fax Point:
14. To save the Tree, press END
and follow the
instructions that appear on the display.
15. Press to end this programming session.
1. Press
.
2. Enter the System Coordinator Mailbox number and
password and press OK
.
3. Press OTHR
.
4. Press CCR
.
5. Press ADMIN
.
6. Enter the CCR Tree number and press OK
. The CCR
Tree number is a number from 1 to 4.
7. Press CHNG
.
8. Enter the Fax Point Path number and press OK
.
9. Press CHNG
. The x represents the Path number.
10. Press NEXT
.
11. Press CHNG
. The type shown on this display is the
current destination type.
Path:
RETRY OK
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST OTHR
CCR Admin
CCR tree:
RETRY
Tree: 1
PRINT QUIT
Path:
RETRY END
<x> Fax
ERASE OK
Mbox: <xxx>
CHNG
Dest: <type>
OK