(Revised 2010-7-2) page 100 of 145
Set System Location
To set the location details of the system
system set syslocation <Location-of-the-system>
Location-of-the-system
The details of where the system is located
N-TRON/Admin#[1]> system set syslocation “San Jose”
N-TRON/Admin#[2]> system set syslocation Hyderabad
Please ensure to use “ “ for supplying arguments with spaces
Get System Uptime
To get the uptime of the device.
N-TRON/Admin#[1]> system get sysuptime
System Up Time : 9 days:17 hours:8 mins:40 secs
Get Number of Ports present in the System
To get the number of ports present in the device.
N-TRON/Admin#[1]> system get portcount
Set IP Address of an SNMP Management Stations
To set the IP address of an SNMP management station
system set snmpmgmtip <Station-number, IP-address>
Station-number
The SNMP management station number
IP-Address
The IP address of the SNMP management station in dotted decimal
notation
N-TRON/Admin#[1]> system set snmpmgmtip 2 10.1.5.100
N-TRON/Admin#[2]> system set snmpmgmtip 5 10.1.6.150
The IP address should be a valid IP address (excluding Class D & Class
E type). To restore a Station Trap to “Value Not Configured”, enter
„0.0.0.0‟.
Set SNMP Get Community name
system set snmpgetcommunity
To set the community name for performing snmpget operation
system set snmpgetcommunity <Community-Name>
Community-Name
The name of the community to be used for performing snmpget
operation
N-TRON/Admin#[1]> system set snmpgetcommunity public
N-TRON/Admin#[1]> system set snmpgetcommunity “N-Tron
Systems”
Please ensure to use “ “ for supplying arguments with spaces
