Filter
Top Products
(Revised 2010-7-2) page 127 of 145
Show IGMP router
Command Name
igmp show router
Description
The igmp show router command is used to display the auto-detected routers
at present.
Syntax
igmp show router
Parameters
None
Examples
N-TRON/Admin#[1]> igmp show router
RouterIp PortNo
------------------------
192.168.1.150 5
NOTES
The router display is used to check that the router ip & port number was
received correctly.
Set IGMP query mode
Command Name
igmp set qmode
Description
Set the query mode of the switch to either on, off, or automatic.
Syntax
igmp set qmode <off | on | auto>
Parameters
off | on | auto
There are three different query modes; off, on, and auto.
Examples
N-TRON/Admin#[1]> igmp set qmode auto
NOTES
Default: Auto
Set IGMP router port
Command Name
igmp set rtrport
Description
Enable or disable a router port based on a port-range.
Syntax
igmp set rtrport <port-range> <enable | disable>
Parameters
port-range
enter a range of port numbers.
enable | disable
enable or disable the router port.
Examples
N-TRON/Admin#[1]> igmp set rtrport 1-4 enable
NOTES
Set IGMP router mode
Command Name
igmp set rtrmode
Description
The igmp show router command is used to display the router group present
in the group list
Syntax
igmp set rtrmode <none | manual | auto>
Parameters
none | manual | auto
There are three different router modes available; none, manual, and
auto.
Examples
N-TRON/Admin#[1]> igmp set rtrmode auto
NOTES
Default: Auto