Filter
Top Products
(Revised 2010-7-2) page 128 of 145
Show IGMP rfilter mode
Command Name
igmp show rfilter
Description
The igmp show rfilter command is used to display the rfilter status by
port(s).
Syntax
Usage: igmp show rfilter <all|port-list>
Parameters
port-list|all
Enter a specific port number list or specify all ports
Examples
N-TRON/Admin#[22]> igmp show rfilter all
N-TRON/Admin#[22]igmp/show> igmp show rfilter 5
Port No. IGMP RFilter
----------------------------
5 DISABLE
N-TRON/Admin#[6]igmp/show> igmp show rfilter 5-7
Port No. IGMP RFilter
----------------------------
5 DISABLE
6 DISABLE
7 DISABLE
N-TRON/Admin#[7]igmp/show>
NOTES
Default: enable
Set IGMP rfilter mode
Command Name
igmp set rfilter
Description
The igmp set rfilter command is used to enable or disable rfilter based on a
port-range.
Syntax
Usage: igmp set rfilter <enable|disable> <port-list|all>
Parameters
enable|disable
Enable or Disable the filter on the specified port.
port-list|all
Enter a specific port number list or specify all ports
Examples
N-TRON/Admin#[35]igmp/set> igmp set rfilter enable 5
IGMP RFilter enabled for port 5.
N-TRON/Admin#[36]igmp/set>
NOTES
Default: enable