N-Tron 9000 Switch User Manual


 
(Revised 2010-7-2) page 143 of 145
KEY SPECIFICATIONS
Switch Properties
Number of MAC Addresses: 4,096
Aging Time: Programmable
Latency Type: 2.9 µs
Backplane Speed: 6.6Gb/s
Switching Method: Store & Forward
Physical
Height: 5.2" (13cm)
Width: 9.0" (22.8cm)
Depth: 5.6" (14.2cm)
Weight (max): 5.0 lbs
Din-Rail mount: 35mm
Electrical
Redundant Input Voltage: 10-30 VDC
Input Current (max): 2.5 A@24V (fully populated)
Inrush @ 24VDC: 16.0 A for 7.5 ms
Input Ripple: Less than 100 mV
N-TRON Power Supply: NTPS-24-5 (5 Amp@24VDC) (NOTE: Not appropriate for use with M12, POE, and HV models.)
Environmental
Operating Temperature: -20°C to 70°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 10% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
Shock and Vibration
(bulkhead mounting)
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz,Triaxial
Reliability
MTBF: >1Million Hours
Connectors
10/100BaseTX: Up to Twenty-four (24) RJ-45 Copper Ports
100BaseFX: Up to Sixteen (16) SC or ST Duplex Ports
1000BaseSX/LX: Two (2) LC Duplex Ports as an option
Recommended Wiring Clearance:
Front: 4" (10.16 cm)
Side: 1" (2.54 cm)
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
100BaseFX, 1000BaseSX:
Multimode: 50-62.5/125µm
100BaseFXE, 1000BaseLX:
Singlemode: 7-10/125µm