Filter
Top Products
(Revised 2010-7-2) page 129 of 145
N-Ring Related Commands
N-Ring get agingtime
Command Name
n-ring get agingtime
Description
To display the N-Ring Agingtime of the device
Syntax
n-ring get agingtime
Parameters
None
Example
N-TRON/Admin#[1]> n-ring get agingtime
N-Ring Aging Time : 20
NOTES
Default: 20 seconds and is separate from the Bridging Aging Time.
N-Ring Aging time is used for the whole switch if the switch is an
N-Ring Manager or becomes an active N-Ring Member.
N-Ring set agingtime
Command Name
n-ring set agingtime
Description
Sets the aging time for dynamically learned MAC addresses of the chipset
when in N-Ring Manager or Active N-Ring Member modes.
Syntax
n-ring set agingtime <aging-time>
Parameters
aging-time
aging time to be set for N-Ring.
Minimum N-Ring agingtime can be 5 seconds.
Default N-Ring aging time is 20 seconds.
Maximum aging time is 1000000 seconds.
Examples
N-TRON/Admin#[1]> n-ring set agingtime 200
NOTES
Is separate from the Bridging Aging Time. N-Ring Aging time is used for
the whole switch if the switch is an N-Ring Manager or becomes an active
N-Ring Member.
N-Ring get webfault
Command Name
n-ring get webfault
Description
To display the browser N-Ring fault reporting mode.
Syntax
n-ring get webfault
Parameters
None
Example
N-TRON/Admin#[1]> n-ring get webfault
N-Ring faults will be shown on N-Ring Web Pages only
NOTES
N-Ring set webfault
Command Name
n-ring set webfault
Description
Sets the browser N-Ring fault reporting mode.
Syntax
n-ring set webfault <ring|all>
Parameters
Ring or all
Examples
N-TRON/Admin#[1]> n-ring set webfault all
N-Ring faults will be shown on All Web Pages
NOTES
N-Ring get interval
Command Name
n-ring get interval
Description
To display the Self-Health Packet interval and missed threshold.
Syntax
n-ring get interval
Parameters
None
Example
N-TRON/Admin#[1]> n-ring get interval
Self Health Packet interval is 1
Maximum Missed Packets is 2
NOTES
Default: interval=1, missed=2