Filter
Top Products
(Revised 2010-7-2) page 139 of 145
Broadcast Packet Count Limit Commands
Get the Broadcast Packet Count Limit for one port
Command Name
broadcast get percentage
Description
Displays the broadcast packet percentage for a particular port.
Syntax
broadcast get percentage <port-number>
Parameters
port-number
The port number must range between 1 and the maximum port number
in the switch.
Examples
N-TRON/Admin#[1]> broadcast get percentage 6
The BPCL for port number 6 is : 100
NOTES
Get the Broadcast Packet Count Limit for all ports
Command Name
broadcast show percentage
Description
Displays the broadcast packet percentage for all ports.
Syntax
broadcast show percentage
Parameters
None
Examples
N-TRON/Admin#[1]> broadcast show percentage
Broadcast Percentage Value for Ports
Port # 1 : 100 Port # 14 : 100
Port # 2 : 100 Port # 15 : 100
Port # 3 : 100 Port # 16 : 100
Port # 4 : 100 Port # 17 : 100
Port # 5 : 100 Port # 18 : 100
Port # 6 : 100 Port # 19 : 100
Port # 7 : 100 Port # 20 : 100
Port # 8 : 100 Port # 21 : 100
Port # 9 : 100 Port # 22 : 100
Port # 10 : 100 Port # 23 : 100
Port # 11 : 100 Port # 24 : 100
Port # 12 : 100 Port # 25 : 100
Port # 13 : 100 Port # 26 : 100
NOTES
These are egress filters.
Set the Broadcast Packet Count Limit
Command Name
broadcast set percentage
Description
Sets the broadcast packet percentage for a particular port
Syntax
broadcast set percentage <port-number> <%>
Parameters
port-number
The port number must range between 1 and the maximum port number
in the switch.
%
The count limit should be in the range 0 to 100 and represents the
percentage.
Examples
N-TRON/Admin#[1]> broadcast set percentage 4 100
NOTES
Default is 3.