Filter
Top Products
|
Handbook 111
• If the fax was transmitted from memory (not directly from
the feeder), a portion of the first page prints after the
report. If you do not want this portion of the first page to
print, set User Function 04, Image in MCF, OFF. Refer to
the “Setting Basic Features, User Function Settings”
section of this handbook.
How to Print
You can set your fax machine to print a message confirmation
report after every transmission (automatic) or you can print a
report only when you want to (manual).
Automatic Printout
Follow this procedure to set your fax machine to print a
message confirmation report after every transmission.
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
The display shows
1:FUNC. PROGRAMMING.
Message Confirmation Report (MCF)
What is it?
This report provides information about your last single-
location fax transmission or polling transmission.
What information does it provide?
• The date of the communication.
• The total amount of time spent Sending or Receiving (S,
R-TIME).
• The Location ID or telephone number of the fax machine
you were communicating with (DISTANT STATION ID).
• The communication mode used (Communication Codes).
• The number of pages sent or received.
• The result of the communication (Results Codes)
• Service codes. Be sure to report these diagnostic codes if
you contact your Authorized Service Dealer about
communication problems.