Filter
Top Products
72
OKIFAX 5250
|
7 Enter the Location ID. This is a descriptive title up to 16
characters long. Refer to the instructions below.
• To enter numbers, use the numeric keypad (press once)
• To enter spaces, press the 14/Space One Touch key
• To enter hyphens (-), press the Hyphen key
• To enter alphabet characters, locate the character you
want on the numeric keypad. Press that key repeatedly
until the character appears in the display.
• To enter a unique character, press the 0/Unique key
repeatedly until the character you want appears in the
display. The following characters are available: ! # & ‘ (
) * + , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
• To enter two successive letters/numbers on the same
key, press the No ᮣ key to move to the next character.
• To move the cursor to make corrections, press the Yes
ᮤ and No ᮣ keys
8 Press the Start key. The display shows (for about three
seconds).
NO=<OR LOCATION>
9 Enter the optional alternate fax number, if desired. Refer to
the instructions following Step 5.
10 Press the Start key to finish programming the One Touch
key.
The display shows
LOCATION
PROGRAMMING.
11 To continue programming One Touch keys, go back to
Step 3. If you are finished programming, press the Select
Function key.
12 Lift off the plastic cover above the One Touch label.
Using a pencil, write in the location name for your One
Touch key(s). Then replace the cover.