Filter
Top Products
|
Handbook 149
User Function Settings
02 MCF(MULTI-LOC.)
This function automatically prints a Message Confirmation
Report after each multiple-location transmission. The
report provides information about the transmission. Refer
to the “Reports, Message Confirmation Report” section of
this handbook.
Available settings are ON (default) and OFF.
03 ERR REPORT (MCF)
This function automatically prints a Message Confirmation
Report every time an error occurs during a transmission or
polling transmission operation. The report provides
information about the transmission. Refer to the “Reports,
Message Confirmation Report” section of this handbook.
Available settings are ON (default) and OFF.
User function settings allow you to customize the general
operation of your fax machine. Refer to the following User
Function Settings List to determine which settings you may
need to change, then refer to the “Changing Your User
Function Settings” part of this section to make the change.
User Function Settings List
01 MCF(SINGLE-LOC.)
This function automatically prints a Message Confirmation
Report after each single-location transmission or polling
transmission. The report provides information about the
transmission. Refer to the “Reports, Message
Confirmation Report” section of this handbook.
Available settings are ON and OFF (default).